Parking Lot Striping Fort Worth, TX

Fort Worth, Texas Parking Lot Striping

​Located in North Central Texas, just Southeast of the Texas Panhandle, Fort Worth is the fifth-largest city in the state of Texas and the sixteenth-largest city in the United States of America. Fort Worth is a cultural gateway into the American West and goes through Tarrant, Parker, Denton, and Wise counties, covering almost 300 square miles. The 2010 Census found that Fort Worth had a population of 741,206. It was estimated that by 2030 it will have 1,211,665 residents. The city is the second most densely populated in the DFW metroplex.
Fort Worth was founded in 1849 on a cliff as an army outpost overlooking the Trinity River. In the present day Fort Worth still embraces its Western legacy and old-fashioned architecture and design. The USS Fort Worth (LCS-3) is the earliest ship of the United States Navy named after the city.
 
Fishing is available at Greenbriar Lake. Texas Parks & Wildlife add fish to the lake including green sunfish, bluegill sunfish, channel catfish, and largemouth bass – along with rainbow trout during the winter. Children under the age of 17 are allowed to fish for free, but adults require a fishing permit with a freshwater stamp to go fishing in the state of Texas.

Wheel Stop Installation in Fort Worth, TX

What are Wheel Stops and Why are They Used in Parking Lots?

Wheel stops are used where it is necessary to block vehicles from traveling into a certain area. They are also used in areas where pedestrians can be in danger of a parking vehicle or for stopping a car from colliding with a wall or a barrier. Wheel can prevent cars from getting over a walkway, embankment, drop off, or ditch. Local ordinance often requires the use of wheel stops in parking vicinity. ADA also encourages the use of wheel stops to prevent vehicles from entering routes used by pedestrians. ​

What is the Purpose of Wheel Stops in Your Parking Lot?

Sometimes drivers mistime braking when they park their cars which can lead to moving the car further than intended or worse, hitting another vehicle. Since you can't do anything about other people braking, it is best to install wheel stops in designated areas. These wheel stops can protect pedestrians from hazards as well and allows them to pass by. These should be installed into places where contact with end barriers like high curbs needs to be avoided. Some local zoning also requires the installation of these to designate an area as non-accessible for vehicles. Wheel stops also need to be maintained regularly and if they are not, they can cause more damage, and the chances of pedestrians getting injured can also increase. ​

Wheel Stop Installation in Your Parking Lot

Wheel stops can be installed on different surfaces. However, the installation method varies according to the material of the wheel stop. The first step will be to clean the area where you want the installation to be done. Position the wheel stop and drill the holes. For rubber wheel stops, 10mm pilot holes are drilled to fix it into an asphalt surface.  In case of a concrete surface, the holes can go as thick as 50mm. Before fitting the nut in the hole, extract dust and clean the area. 
If you are using wheel stops made of concrete, the procedure will remain the same except for the depth of the holes which can go as deep as 70 to 80mm. Clean the holes of any dust and then add sealant adhesive to the underside of the wheel stop. Before finalizing the installation, insert rubber plugs into the holes where the bolts were fixed. ​

Temperature in Fort Worth, Texas

Contact Us Today for a Free Quote in Fort Worth, TX at (817) 476-9909